Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- systembelastung_ermitteln [2016-04-12 22:50:02] – angelegt - Externe Bearbeitung 127.0.0.1
+++ systembelastung_ermitteln [2023-05-18 17:35:16] (aktuell) – [Abfrage] manfred
@@ Zeile 1: / Zeile 1: @@
+====== Systembelastung ermitteln ======
+===== Werkzeug =====
+==== vmstat -a ====
+  # vmstat -a 1 10
+  procs ------------memory----------- ---swap-- -----io---- -system-- ----cpu-----
+   r  b   swpd   free   inact  active   si   so    bi    bo   in   cs us sy  id wa
+  0   5372  54552 2309996 4849848    0    0   269    28    0    0  1  0  98  0
+  0   5372  54552 2310040 4849880    0    0    28     0  312  450  0  0 100  0
+  0   5372  54552 2310040 4849880    0    0    16     0  184  234  0  0 100  0
+  0   5372  54552 2310036 4849884    0    0     8     0  126  141  0  0 100  0
+  0   5372  54552 2310036 4849884    0    0     0     0  179  288  0  0 100  0
+  0   5372  54552 2310036 4849884    0    0    12     0  126  178  0  0 100  0
+  0   5372  54552 2310080 4849896    0    0    12     0  143  217  0  0 100  0
+  0   5372  54544 2310096 4849940    0    0    28   688  586 1114  0  0  99  0
+  0   5372  54552 2310088 4849936    0    0     0     0  123  124  0  0 100  0
+  0   5372  54552 2310100 4849936    0    0     4     0  160  113  0  0 100  0
+  - Spalte (procs - r): number of processes waiting for run time
+  - Spalte (procs - b): number of processes in uninterruptible sleep
+  - Spalte (memory - swpd): mem swap in use
+  - Spalte (memory - free): mem free/idle
+  - Spalte (memory - inact): mem inactive
+  - Spalte (memory - active): mem active
+  - Spalte (swap - si): swap read
+  - Spalte (swap - so): swap write
+  - Spalte (io - bi): io block in
+  - Spalte (io - bo): io block out
+  - Spalte (system - in): system interrupts
+  - Spalte (system - cs): system context switches per second
+  - Spalte (cpu - us): cpu user time
+  - Spalte (cpu - sy): cpu system time
+  - Spalte (cpu - id): cpu idle
+  - Spalte (cpu - wa): cpu waiting for io
+===== Abfrage =====
+<file bash belastung.sh>
+#!/bin/bash
+# Linux
+ANZAHL="10"                             # Messzeit für vmstat, RX und TX
+                                        # ${ANZAHL} x 3 = mind. Laufzeit dieses Scripts
+TICKER="$(echo "${ANZAHL}" | awk '{print 3+$1}')"
+VMSTAT="$(vmstat -a 1 ${TICKER} | tail -n1 | awk -v z=${ANZAHL} '{ab+=$1; bb+=$2; cb+=$3; db+=$4; eb+=$5; fb+=$6; gb+=$7; hb+=$8; ib+=$9; jb+=$10; kb+=$11; lb+=$12; mb+=$13; nb+=$14; ob+=$15; pb+=$16} END {print "number_of_processes_waiting_for_run_time="ab/z,"number_of_processes_in_uninterruptible_sleep="bb/z,"mem_swap_in_use="cb/z,"mem_free="db/z,"mem_inactive="eb/z,"mem_active="fb/z,"swap_read="gb/z,"swap_write="hb/z,"io_block_in="ib/z,"io_block_out="jb/z,"system_interrupts="kb/z,"system_context_switches_per_second="lb/z,"cpu_user_time="mb/z,"cpu_system_time="nb/z,"cpu_idle="ob/z,"cpu_waiting_for_io="pb/z}')"
+RXBPS="$(RXB="$(cat /sys/class/net/eth*/statistics/rx_bytes | awk '{z=$1;s+=z}END{print s}')";sleep ${ANZAHL};echo "$(cat /sys/class/net/eth*/statistics/rx_bytes | awk '{z=$1;s+=z}END{print s}') $RXB" | awk -v z=${ANZAHL} '{print "byte_je_sekunde_empfangen="($1-$2)/z}')"
+TXBPS="$(TXB="$(cat /sys/class/net/eth*/statistics/tx_bytes | awk '{z=$1;s+=z}END{print s}')";sleep ${ANZAHL};echo "$(cat /sys/class/net/eth*/statistics/tx_bytes | awk '{z=$1;s+=z}END{print s}') $TXB" | awk -v z=${ANZAHL} '{print "byte_je_sekunde_gesendet="($1-$2)/z}')"
+echo "hostname=$(hostname -f) ${VMSTAT} ${RXBPS} ${TXBPS} apache_processes=$(ps -ef | egrep '^www-data.*apache2 -k start' | wc -l) $(uptime | awk '{gsub(",","");print "load_average_1="$(NF-2),"load_average_5="$(NF-1),"load_average_15="$(NF)}')" | tr -s ' ' '\n'
+</file>
+==== Ausgabe ====
+  hostname=test.domain.de
+  number_of_processes_waiting_for_run_time=0
+  number_of_processes_in_uninterruptible_sleep=0
+  mem_swap_in_use=0
+  mem_free=131625
+  mem_inactive=38892.4
+  mem_active=23385.2
+  swap_read=0
+  swap_write=0
+  io_block_in=0
+  io_block_out=0
+  system_interrupts=3.6
+  system_context_switches_per_second=2
+  cpu_user_time=0
+  cpu_system_time=0
+  cpu_idle=10
+  cpu_waiting_for_io=0
+  byte_je_sekunde_empfangen=260.9
+  byte_je_sekunde_gesendet=377.1
+  apache_processes=10
+  load_average_1=0.02
+  load_average_5=0.06
+  load_average_15=0.02
+===== Datenbank gestützte Überwachung =====
+==== Datenbank, Tabelle und User anlegen ====
+Datenbank anlegen:
+  # echo "CREATE DATABASE belastungswaechter;" | mysql -uroot -p
+Tabelle anlegen:
+  # echo "CREATE TABLE belastungswaechter (hostname VARCHAR(254) not NULL, number_of_processes_waiting_for_run_time DECIMAL(16,4), number_of_processes_in_uninterruptible_sleep DECIMAL(16,4), mem_swap_in_use DECIMAL(16,4), mem_free DECIMAL(16,4), mem_inactive DECIMAL(16,4), mem_active DECIMAL(16,4), swap_read DECIMAL(16,4), swap_write DECIMAL(16,4), io_block_in DECIMAL(16,4), io_block_out DECIMAL(16,4), system_interrupts DECIMAL(16,4), system_context_switches_per_second DECIMAL(16,4), cpu_user_time DECIMAL(16,4), cpu_system_time DECIMAL(16,4), cpu_idle DECIMAL(16,4), cpu_waiting_for_io DECIMAL(16,4), byte_je_sekunde_empfangen DECIMAL(16,4), byte_je_sekunde_gesendet DECIMAL(16,4), apache_processes DECIMAL(16,4), load_average_1 DECIMAL(16,4), load_average_5 DECIMAL(16,4), load_average_15 DECIMAL(16,4),  startzeit_fuer_die_messung DATETIME);" | mysql -uroot -p belastungswaechter
+User anlegen:
+  # echo "INSERT INTO user (host,user) VALUES ('%','bwaechter');" | mysql -uroot -p mysql
+  # echo "FLUSH PRIVILEGES;" | mysql -uroot mysql
+dem User die nötigen Berechtigungen geben:
+  # echo "REVOKE ALL ON *.* TO bwaechter;" | mysql -uroot -p mysql
+  # echo "GRANT SELECT,INSERT ON * TO bwaechter IDENTIFIED BY 'geheim' WITH GRANT OPTION;FLUSH PRIVILEGES;" | mysql -uroot -p belastungswaechter
+==== belastungswaechter.sh ====
+  #!/bin/bash
+  ANZAHL="10"                           # Messzeit für vmstat, RX und TX
+                                        # ${ANZAHL} x 3 = mind. Laufzeit dieses Scripts
+  BELASTUNGSWAECHTER="$(awk -F':' '/:omrelp:/ {print $3}' /etc/rsyslog.d/50-default.conf)"   # DB-Host
+  BELASTUNGSUSER="bwaechter"            # DB-User
+  BELASTUNGSPASSWD="geheim"       # DB-Passwd
+  BELASTUNGSDB="belastungswaechter"     # DB-Name
+  BELASTUNGSTAB="belastungswaechter"    # DB-Tabellenname
+  STARTMESSUNG="$(date +'%F %T')"       # Startzeit für die Messung
+  PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/root/bin"
+  if [ -z "${BELASTUNGSWAECHTER}" ] ; then
+        exit 0
+  fi
+  TICKER="$(echo "${ANZAHL}" | awk '{print 3+$1}')"
+  VMSTAT="$(vmstat -a 1 ${TICKER} | tail -n${ANZAHL} | awk -v z=${ANZAHL} '{ab+=$1; bb+=$2; cb+=$3; db+=$4; eb+=$5; fb+=$6; gb+=$7; hb+=$8; ib+=$9; jb+=$10; kb+=$11; lb+=$12; mb+=$13; nb+=$14; ob+=$15; pb+=$16} END {print "number_of_processes_waiting_for_run_time="ab/z,"number_of_processes_in_uninterruptible_sleep="bb/z,"mem_swap_in_use="cb/z,"mem_free="db/z,"mem_inactive="eb/z,"mem_active="fb/z,"swap_read="gb/z,"swap_write="hb/z,"io_block_in="ib/z,"io_block_out="jb/z,"system_interrupts="kb/z,"system_context_switches_per_second="lb/z,"cpu_user_time="mb/z,"cpu_system_time="nb/z,"cpu_idle="ob/z,"cpu_waiting_for_io="pb/z}')"
+  RXBPS="$(RXB="$(cat /sys/class/net/eth*/statistics/rx_bytes | awk '{z=$1;s+=z}END{print s}')";sleep ${ANZAHL};echo "$(cat /sys/class/net/eth*/statistics/rx_bytes | awk '{z=$1;s+=z}END{print s}') $RXB" | awk -v z=${ANZAHL} '{print "byte_je_sekunde_empfangen="($1-$2)/z}')"
+  TXBPS="$(TXB="$(cat /sys/class/net/eth*/statistics/tx_bytes | awk '{z=$1;s+=z}END{print s}')";sleep ${ANZAHL};echo "$(cat /sys/class/net/eth*/statistics/tx_bytes | awk '{z=$1;s+=z}END{print s}') $TXB" | awk -v z=${ANZAHL} '{print "byte_je_sekunde_gesendet="($1-$2)/z}')"
+  PARAM=""
+  WERTE=""
+  for SPALTE in $(echo "hostname=$(hostname -f) ${VMSTAT} ${RXBPS} ${TXBPS} apache_processes=$(ps -ef | egrep '^www-data.*apache2 -k start' | wc -l) $(uptime | awk '{gsub(",","");print "load_average_1="$(NF-2),"load_average_5="$(NF-1),"load_average_15="$(NF)}')")
+  do
+          PARAM+="$(echo ${SPALTE} | awk -F'=' '{print $1}'), "
+          WERTE+="$(echo ${SPALTE} | awk -F'=' '{print "\""$2"\""}'), "
+  done
+  PARAREIHE="${PARAM} startzeit_fuer_die_messung"
+  WERTREIHE="${WERTE} \"${STARTMESSUNG}\""
+  ### ab in die Datenbank mit den Daten
+  echo "INSERT INTO ${BELASTUNGSTAB} (${PARAREIHE}) VALUES (${WERTREIHE})" | mysql -h ${BELASTUNGSWAECHTER} -u${BELASTUNGSUSER} -p${BELASTUNGSPASSWD} ${BELASTUNGSDB}