Wissen

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Sie befinden sich hier: Start » hard-ware-infos
Zuletzt angesehen: • crontab • rust • sshfs • networkmanager • awk • bash • ssh_ssl • software • android • hardware
hard-ware-infos

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung		Vorhergehende Überarbeitung
hard-ware-infos [2017-06-12 13:40:21] – [dmidecode] manfredhard-ware-infos [2018-12-10 15:25:22] (aktuell) – [dmidecode] manfred
Zeile 1: Zeile 1:
 +====== Hard-Ware-Infos ======
 +
 +Linux-Mint 17.2 Rafaela:
 +  linux#> aptitude install inxi
 +
 +oder
 +  ubuntu_linux#> aptitude install file hddtemp iproute2 lm-sensors mesa-utils module-init-tools net-tools sudo usbutils x11-utils x11-xserver-utils
 +  ubuntu_linux#> aptitude install dmidecode
 +  freebsd#> pkg install sysutils/dmidecode
 +
 +
 +===== System Infos =====
 +
 +
 +==== inxi ====
 +
 +Beispielaufruf:
 +  > inxi -v 7
 +  System:    Host: wanderer Kernel: 3.16.0-38-generic x86_64 (64 bit, gcc: 4.8.2) 
 +             Desktop: Cinnamon 2.6.13  dm: mdm Distro: Linux Mint 17.2 Rafaela
 +  Machine:   System: Dell product: Latitude E6320 version: 01 Chassis: type: 9
 +             Mobo: Dell model: 0Y45W5 Bios: Dell version: A16 date: 01/01/2013
 +  CPU:       Dual core Intel Core i7-2620M CPU (-HT-MCP-) cache: 4096 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10775.9 
 +             Clock Speeds: 1: 818.753 MHz 2: 926.964 MHz 3: 992.250 MHz 4: 809.578 MHz
 +  Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0 chip-ID: 8086:0126 
 +             X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz 
 +             GLX Renderer: Mesa DRI Intel Sandybridge Mobile GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
 +  Audio:     Card: Intel 6 Series/C200 Series Family High Definition Audio Controller 
 +             driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:1c20 
 +             Sound: Advanced Linux Sound Architecture ver: k3.16.0-38-generic
 +  Network:   Card-1: Intel 82579LM Gigabit Network Connection 
 +             driver: e1000e ver: 2.3.2-k port: 4080 bus-ID: 00:19.0 chip-ID: 8086:1502
 +             IF: eth0 state: down mac: 5c:26:0a:63:49:62
 +             Card-2: Intel Centrino Advanced-N 6205 [Taylor Peak] 
 +             driver: iwlwifi ver: in-tree: bus-ID: 02:00.0 chip-ID: 8086:0082
 +             IF: wlan0 state: up mac: a0:88:b4:2e:00:80
 +             WAN IP: 176.199.133.186 IF: wwan0 ip: N/A ip-v6: N/A IF: eth0 ip: N/A ip-v6: N/A 
 +             IF: wlan0 ip: 192.168.2.51 ip-v6: N/A 
 +  Drives:    HDD Total Size: 320.1GB (79.3% used)
 +             1: id: /dev/sda model: ST320LT014 size: 320.1GB serial: W0Q0E9ME 
 +             Optical: No optical drives detected.
 +  Partition: ID: / size: 275G used: 237G (91%) fs: ext4 dev: /dev/sda1 
 +             label: N/A uuid: 9b158826-55ff-4d90-b9b6-17a1cbec5928
 +             ID: swap-1 size: 20.07GB used: 0.00GB (0%) fs: swap dev: /dev/sda2 
 +             label: N/A uuid: cf951232-9db2-4ff7-97c8-4f2b0ab2bb27
 +  RAID:      System: supported: N/A
 +             No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
 +             Unused Devices: none
 +  Unmounted: No unmounted partitions detected
 +  Sensors:   System Temperatures: cpu: 25.0C mobo: N/A 
 +             Fan Speeds (in rpm): cpu: N/A 
 +  Info:      Processes: 313 Uptime: 3:37 Memory: 2051.6/7864.6MB Runlevel: 2 Gcc sys: 4.8.4 
 +             Client: Shell (bash 4.3.11 running in xterm) inxi: 1.9.17 
 +
 +
 +==== dmidecode ====
 +
 +Seriennummer:
 +  # dmidecode -t baseboard | grep -Fi 'Serial Number:'
 +
 +BIOS:
 +  # dmidecode -t system | egrep -i 'Manufacturer:|Product Name:|Serial Number:' | sed -e 's/^\t/BIOS /' -e 's/: /=/'
 +  BIOS Manufacturer=Dell Inc.
 +  BIOS Product Name=PowerEdge 1950
 +  BIOS Serial Number=28A9A4A
 +
 +Service Tag:
 +  # dmidecode -t 1 | egrep -i 'Serial Number:'
 +          Serial Number: 28A9A4A
 +
 +alle "-t"-Optionen
 +  > dmidecode -t bios
 +  > dmidecode -t 0
 +  
 +  > dmidecode -t system
 +  > dmidecode -t 1
 +  
 +  > dmidecode -t baseboard
 +  > dmidecode -t 2
 +  
 +  > dmidecode -t chassis
 +  > dmidecode -t 3
 +  
 +  > dmidecode -t processor
 +  > dmidecode -t 4
 +  
 +  > dmidecode -t memory
 +  > dmidecode -t 5
 +  
 +  > dmidecode -t cache
 +  > dmidecode -t 6
 +  
 +  > dmidecode -t connector
 +  > dmidecode -t 7
 +  
 +  > dmidecode -t slot
 +  > dmidecode -t 8
 +
 +RAM:
 +  > dmidecode -t 16 -t 17 -t 18 -t 19
 +
 +Mainboard:
 +  > dmidecode -t 2
 +