Hard-Ware-Infos

Linux-Mint 17.2 Rafaela:

linux#> aptitude install inxi

oder

ubuntu_linux#> aptitude install file hddtemp iproute2 lm-sensors mesa-utils module-init-tools net-tools sudo usbutils x11-utils x11-xserver-utils
ubuntu_linux#> aptitude install dmidecode
freebsd#> pkg install sysutils/dmidecode

System Infos

inxi

Beispielaufruf:

> inxi -v 7
System:    Host: wanderer Kernel: 3.16.0-38-generic x86_64 (64 bit, gcc: 4.8.2) 
           Desktop: Cinnamon 2.6.13  dm: mdm Distro: Linux Mint 17.2 Rafaela
Machine:   System: Dell product: Latitude E6320 version: 01 Chassis: type: 9
           Mobo: Dell model: 0Y45W5 Bios: Dell version: A16 date: 01/01/2013
CPU:       Dual core Intel Core i7-2620M CPU (-HT-MCP-) cache: 4096 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10775.9 
           Clock Speeds: 1: 818.753 MHz 2: 926.964 MHz 3: 992.250 MHz 4: 809.578 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0 chip-ID: 8086:0126 
           X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz 
           GLX Renderer: Mesa DRI Intel Sandybridge Mobile GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio:     Card: Intel 6 Series/C200 Series Family High Definition Audio Controller 
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:1c20 
           Sound: Advanced Linux Sound Architecture ver: k3.16.0-38-generic
Network:   Card-1: Intel 82579LM Gigabit Network Connection 
           driver: e1000e ver: 2.3.2-k port: 4080 bus-ID: 00:19.0 chip-ID: 8086:1502
           IF: eth0 state: down mac: 5c:26:0a:63:49:62
           Card-2: Intel Centrino Advanced-N 6205 [Taylor Peak] 
           driver: iwlwifi ver: in-tree: bus-ID: 02:00.0 chip-ID: 8086:0082
           IF: wlan0 state: up mac: a0:88:b4:2e:00:80
           WAN IP: 176.199.133.186 IF: wwan0 ip: N/A ip-v6: N/A IF: eth0 ip: N/A ip-v6: N/A 
           IF: wlan0 ip: 192.168.2.51 ip-v6: N/A 
Drives:    HDD Total Size: 320.1GB (79.3% used)
           1: id: /dev/sda model: ST320LT014 size: 320.1GB serial: W0Q0E9ME 
           Optical: No optical drives detected.
Partition: ID: / size: 275G used: 237G (91%) fs: ext4 dev: /dev/sda1 
           label: N/A uuid: 9b158826-55ff-4d90-b9b6-17a1cbec5928
           ID: swap-1 size: 20.07GB used: 0.00GB (0%) fs: swap dev: /dev/sda2 
           label: N/A uuid: cf951232-9db2-4ff7-97c8-4f2b0ab2bb27
RAID:      System: supported: N/A
           No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   System Temperatures: cpu: 25.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 313 Uptime: 3:37 Memory: 2051.6/7864.6MB Runlevel: 2 Gcc sys: 4.8.4 
           Client: Shell (bash 4.3.11 running in xterm) inxi: 1.9.17

dmidecode

Seriennummer:

# dmidecode -t baseboard | grep -Fi 'Serial Number:'

BIOS:

# dmidecode -t system | egrep -i 'Manufacturer:|Product Name:|Serial Number:' | sed -e 's/^\t/BIOS /' -e 's/: /=/'
BIOS Manufacturer=Dell Inc.
BIOS Product Name=PowerEdge 1950
BIOS Serial Number=28A9A4A

Service Tag:

# dmidecode -t 1 | egrep -i 'Serial Number:'
        Serial Number: 28A9A4A

alle "-t"-Optionen

> dmidecode -t bios
> dmidecode -t 0

> dmidecode -t system
> dmidecode -t 1

> dmidecode -t baseboard
> dmidecode -t 2

> dmidecode -t chassis
> dmidecode -t 3

> dmidecode -t processor
> dmidecode -t 4

> dmidecode -t memory
> dmidecode -t 5

> dmidecode -t cache
> dmidecode -t 6

> dmidecode -t connector
> dmidecode -t 7

> dmidecode -t slot
> dmidecode -t 8

RAM:

> dmidecode -t 16 -t 17 -t 18 -t 19

Mainboard:

> dmidecode -t 2