Wissen

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.
====== Hard-Ware-Infos ======

Linux-Mint 17.2 Rafaela:
  linux#> aptitude install inxi

oder
  ubuntu_linux#> aptitude install file hddtemp iproute2 lm-sensors mesa-utils module-init-tools net-tools sudo usbutils x11-utils x11-xserver-utils
  ubuntu_linux#> aptitude install dmidecode
  freebsd#> pkg install sysutils/dmidecode


===== System Infos =====


==== inxi ====

Beispielaufruf:
  > inxi -v 7
  System:    Host: wanderer Kernel: 3.16.0-38-generic x86_64 (64 bit, gcc: 4.8.2) 
             Desktop: Cinnamon 2.6.13  dm: mdm Distro: Linux Mint 17.2 Rafaela
  Machine:   System: Dell product: Latitude E6320 version: 01 Chassis: type: 9
             Mobo: Dell model: 0Y45W5 Bios: Dell version: A16 date: 01/01/2013
  CPU:       Dual core Intel Core i7-2620M CPU (-HT-MCP-) cache: 4096 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10775.9 
             Clock Speeds: 1: 818.753 MHz 2: 926.964 MHz 3: 992.250 MHz 4: 809.578 MHz
  Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0 chip-ID: 8086:0126 
             X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz 
             GLX Renderer: Mesa DRI Intel Sandybridge Mobile GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
  Audio:     Card: Intel 6 Series/C200 Series Family High Definition Audio Controller 
             driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:1c20 
             Sound: Advanced Linux Sound Architecture ver: k3.16.0-38-generic
  Network:   Card-1: Intel 82579LM Gigabit Network Connection 
             driver: e1000e ver: 2.3.2-k port: 4080 bus-ID: 00:19.0 chip-ID: 8086:1502
             IF: eth0 state: down mac: 5c:26:0a:63:49:62
             Card-2: Intel Centrino Advanced-N 6205 [Taylor Peak] 
             driver: iwlwifi ver: in-tree: bus-ID: 02:00.0 chip-ID: 8086:0082
             IF: wlan0 state: up mac: a0:88:b4:2e:00:80
             WAN IP: 176.199.133.186 IF: wwan0 ip: N/A ip-v6: N/A IF: eth0 ip: N/A ip-v6: N/A 
             IF: wlan0 ip: 192.168.2.51 ip-v6: N/A 
  Drives:    HDD Total Size: 320.1GB (79.3% used)
             1: id: /dev/sda model: ST320LT014 size: 320.1GB serial: W0Q0E9ME 
             Optical: No optical drives detected.
  Partition: ID: / size: 275G used: 237G (91%) fs: ext4 dev: /dev/sda1 
             label: N/A uuid: 9b158826-55ff-4d90-b9b6-17a1cbec5928
             ID: swap-1 size: 20.07GB used: 0.00GB (0%) fs: swap dev: /dev/sda2 
             label: N/A uuid: cf951232-9db2-4ff7-97c8-4f2b0ab2bb27
  RAID:      System: supported: N/A
             No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
             Unused Devices: none
  Unmounted: No unmounted partitions detected
  Sensors:   System Temperatures: cpu: 25.0C mobo: N/A 
             Fan Speeds (in rpm): cpu: N/A 
  Info:      Processes: 313 Uptime: 3:37 Memory: 2051.6/7864.6MB Runlevel: 2 Gcc sys: 4.8.4 
             Client: Shell (bash 4.3.11 running in xterm) inxi: 1.9.17 


==== dmidecode ====

Seriennummer:
  # dmidecode -t baseboard | grep -Fi 'Serial Number:'

BIOS:
  # dmidecode -t system | egrep -i 'Manufacturer:|Product Name:|Serial Number:' | sed -e 's/^\t/BIOS /' -e 's/: /=/'
  BIOS Manufacturer=Dell Inc.
  BIOS Product Name=PowerEdge 1950
  BIOS Serial Number=28A9A4A

Service Tag:
  # dmidecode -t 1 | egrep -i 'Serial Number:'
          Serial Number: 28A9A4A

alle "-t"-Optionen
  > dmidecode -t bios
  > dmidecode -t 0
  
  > dmidecode -t system
  > dmidecode -t 1
  
  > dmidecode -t baseboard
  > dmidecode -t 2
  
  > dmidecode -t chassis
  > dmidecode -t 3
  
  > dmidecode -t processor
  > dmidecode -t 4
  
  > dmidecode -t memory
  > dmidecode -t 5
  
  > dmidecode -t cache
  > dmidecode -t 6
  
  > dmidecode -t connector
  > dmidecode -t 7
  
  > dmidecode -t slot
  > dmidecode -t 8

RAM:
  > dmidecode -t 16 -t 17 -t 18 -t 19

Mainboard:
  > dmidecode -t 2