openqrm-linuxrc

Im folgenden werden einige Änderungen gezeigt, die nötig sind.

# vi /usr/share/openqrm/etc/templates/openqrm-linuxrc

vorher:

    rm -f /mplog1
    echo "- (2) Starting hardware detection (all system components)"
    for module in `/sbin/pcimodules`; do
        echo " -- loading $module"
        modprobe -s -k "$module"
    done
        umount /tmp_download
        rmdir /tmp_download
        # start udev
        udevd --daemon
        # give time to settle, especially needed for some scsi devices
        sleep 3
}

hachher:

    rm -f /mplog1
    echo "- (2) Starting hardware detection (all system components)"
    for module in `/sbin/pcimodules`; do
        # WEG SKIP MODULE
        if [ "$module" == "matroxfb_base" ] || [ "$module" == "radeon" ] || [ "$module" == "radeonfb" ]  ; then
        echo " -- skip this $module"
        else
        echo " -- loading $module"
        sleep 3
        modprobe -s -k "$module"
        fi
    done
        umount /tmp_download
        rmdir /tmp_download
        # start udev
    #echo "- (2a) Starting udev"
        #udevd --daemon
        #udevd --daemon --debug
        # give time to settle, especially needed for some scsi devices
#       sleep 3
}

vorher:

# main
mount -t proc proc /proc
# creating the devices
echo "selbst geschriebene Version ..."
echo "Creating the devices ..."
makedevs -d /etc/initrd-devices.conf /
mkdir -p /dev/fd
ln -sf /proc/self/fd /dev/fd
mknod /dev/tty c 5 0
mknod /dev/console c 5 1
mknod /dev/ptmx c 5 2
ln -sf /dev/ram1 /dev/ram
mknod /dev/random c 1 8
mknod /dev/urandom c 1 9
echo 0x0100 > /proc/sys/kernel/real-root-dev
echo 6 > /proc/sys/kernel/printk
syslogd &&  klogd
# need to run depmod 2 times as experienced
depmod -a
depmod -a
# load virtio drivers for KVM VMs
modprobe virtio 2>/mplog
modprobe virtio_pci 2>/mplog
modprobe virtio_ring 2>/mplog
modprobe virtio_net 2>/mplog
modprobe usbhid 2>/mplog
rm -f  /mplog
echo "- (1) Starting hardware detection (network)"
for module in `/sbin/pcimodules`; do
    echo " -- loading $module"
    modprobe -s -k "$module"
done
eval `cat /proc/cmdline`
if grep -q sysfs /proc/filesystems ; then
        mount -t sysfs none /sys
fi

nachher:

# main
mount -t proc proc /proc
# creating the devices
echo "selbst geschriebenen Version ..."
sleep 5
echo "Creating the devices ..."
makedevs -d /etc/initrd-devices.conf /
mkdir -p /dev/fd
ln -sf /proc/self/fd /dev/fd
mknod /dev/tty c 5 0
#mknod /dev/console c 5 1
ln -sf /dev/ram1 /dev/ram
mknod /dev/random c 1 8
mknod /dev/urandom c 1 9
echo 0x0100 > /proc/sys/kernel/real-root-dev
echo 6 > /proc/sys/kernel/printk
syslogd &&  klogd
# need to run depmod 2 times as experienced
depmod -a
depmod -a
# load virtio drivers for KVM VMs
modprobe virtio 2>/mplog
modprobe virtio_pci 2>/mplog
modprobe virtio_ring 2>/mplog
modprobe virtio_net 2>/mplog
# load usb drivers for keybord an mouse
modprobe hid 2>/mplog
modprobe usbhid 2>/mplog
#
rm -f  /mplog
eval `cat /proc/cmdline`
if grep -q sysfs /proc/filesystems ; then
        mount -t sysfs none /sys
fi
echo "- (1a) Starting udev"
udevd --daemon
# give time to settle, especially needed for some scsi devices
sleep 3
echo "- (1b) Starting hardware detection (network)"
for module in `/sbin/pcimodules`; do
    echo " -- loading $module"
    modprobe -s -k "$module"
done

vorher:

        # suchen und ersetzen
        sed -i "s#127\.0\.1\.1.*##g" /mnt/etc/hosts
        echo "127.0.1.1 $appliance_name.oqrm.victorvox.net $appliance_name" >> /mnt/etc/hosts
        echo "$appliance_name.oqrm.victorvox.net" > /mnt/etc/mailname

nachher:

        hostname $appliance_name
        # suchen und ersetzen
        sed -i "s#127\.0\.1\.1.*##g" /mnt/etc/hosts
        echo "127.0.1.1 $appliance_name.oqrm.victorvox.net $appliance_name" >> /mnt/etc/hosts
        echo "$appliance_name.oqrm.victorvox.net" > /mnt/etc/mailname
        echo "$appliance_name" > /mnt/etc/hostname
        echo "Acquire::http::Proxy \"http://$OPENQRM_SERVER_IP_ADDRESS:3128/\";" > /mnt/etc/apt/apt.conf
        echo "Acquire::ftp::Proxy \"http://$OPENQRM_SERVER_IP_ADDRESS:3128/\";" >> /mnt/etc/apt/apt.conf
        echo "Acquire::https::Proxy \"http://$OPENQRM_SERVER_IP_ADDRESS:3128/\";" >> /mnt/etc/apt/apt.conf

vorher:

        # (common entries provided by a local function)
        create_fstab_commons

        # transfer resource basedir
        echo "Preparing resource openQRM client"

        echo "Insert eth0 mac in 70-persistent-net.rules"
        echo "SUBSYSTEM==\"net\", ACTION==\"add\", DRIVERS==\"?*\", ATTR{address}==\"$OPENQRM_RESOURCE_MAC_ADDRESS\", ATTR{type}==\"1\", KERNEL==\"eth*\", NAME=\"eth0\"" >/etc/udev/rules.d/70-persistent-net.rules

nachher:

        # (common entries provided by a local function)
        create_fstab_commons

        # transfer resource basedir
        echo "Preparing resource openQRM client"

        #echo "Insert eth0 mac in 70-persistent-net.rules"
        #echo "SUBSYSTEM==\"net\", ACTION==\"add\", DRIVERS==\"?*\", ATTR{address}==\"$OPENQRM_RESOURCE_MAC_ADDRESS\", ATTR{type}==\"1\", KERNEL==\"eth*\", NAME=\"eth0\"" >/mnt/etc/udev/rules.d/70-persistent-net.rules

        # disable plymouth
        if [ -e /mnt/etc/init/plymouth-splash.conf ]; then
                echo "Deactivate plymouth"
                mv /mnt/etc/init/plymouth-splash.conf /mnt/etc/init/plymouth-splash.conf.disabled
        fi

ganz unten

Dieser Zusatz kann entfernt werden!

vorher:

### in die HW-DB eintragen
if $WGET -q -O hardwareinfos_zum_server_schicken.sh "$openqrm_web_protocol://$OPENQRM_SERVER_IP_ADDRESS/openqrm/boot-service/hardwareinfos_zum_server_schicken.sh"; then
        /bin/sh hardwareinfos_zum_server_schicken.sh
fi

nachher:

### in die HW-DB eintragen
#if $WGET -q -O hardwareinfos_zum_server_schicken.sh "$openqrm_web_protocol://$OPENQRM_SERVER_IP_ADDRESS/openqrm/boot-service/hardwareinfos_zum_server_schicken.sh"; then
#        /bin/sh hardwareinfos_zum_server_schicken.sh
#fi